Fisher & Paykel FlexiFit 405 Nasal CPAP Mask
-
Estimated Delivery: Oct 17 - Oct 21
-
Free Shipping & Returns:
On all orders over $75
Prescription required.
This is a prescription-only medical device. We cannot ship it until we receive and verify a valid prescription from your physician. Upload it at checkout, or email it to shannonrrt@justonebreathllc.com. Orders containing a prescription item are held until the prescription is verified, then released to our fulfillment partner.
The Fisher & Paykel FlexiFit 405 Nasal CPAP Mask delivers a comfortable and secure over-the-nose therapy solution designed for ease of use. Equipped with proprietary FlexiFit Technology, it automatically conforms to various facial contours for simplified one-step fitting and minimal adjustments.
Featuring an integrated Glider Clip and Strap mechanism alongside an advanced Bias Air Diffuser, this lightweight mask ensures quiet operation while maintaining seal stability throughout active sleep.
Key Features
| Brand | Fisher & Paykel |
| Model | FlexiFit 405 |
| Mask Type | Nasal Mask |
| Operating Therapy Pressure Range | 3 to 25 cmH²O |
| Prescription Required | No |
| FSA/HSA Eligible | Yes |
| Cushion Material | Silicone and Foam |
Highlights
- FlexiFit™ Technology: automatically adjusts to a wide range of nasal and facial contours with one-step fitting and easy adjustments
- Glider Clip and Strap: simple one-step removal of headgear
- Bias Air Diffuser: advanced air diffuser system prevents air from blowing out of your mask during therapy, and provides decreased noise levels.
Materials & care
| Part | Cleaning Frequency | Instructions |
|---|---|---|
| Nasal Cushions | Daily | Using a mild detergent* and warm, drinking-quality water, gently clean nasal cushions to remove any dirt, debris, and oils. Vinegar solutions (3:1, water:vinegar mix) can be used by soaking for 30 minutes to kill accumulated bacteria. Rinse thoroughly. Allow to air dry, avoiding direct sunlight. |
| Mask Frame | Weekly | Using a mild detergent* and warm, drinking-quality water, gently clean the mask frame to remove any dirt, debris, and oils. Vinegar solutions (3:1, water:vinegar mix) can be used by soaking for 30 minutes to kill accumulated bacteria. Rinse thoroughly. Allow to air dry, avoiding direct sunlight. |
| Headgear | Weekly | Using a mild detergent* and warm, drinking-quality water, gently clean the mask headgear to remove any dirt, debris, and oils. Do not use a vinegar solution. Rinse thoroughly. Hang dry, avoiding direct sunlight. |
| Chinstrap | Weekly | Using a mild detergent* and warm, drinking-quality water, gently clean the mask chinstrap to remove any dirt, debris, and oils. Do not use a vinegar solution. Rinse thoroughly. Hang dry, avoiding direct sunlight. |
Sizing & fit
Breathing Style:
- Nasal Breathers
- Mouth Breathers (when paired with a CPAP mask chinstrap)
Sleeping Style:
- Back Sleepers
- Side Sleepers
- Active Sleepers
Additional Considerations:
- High Pressure Settings
- Glasses Wearers
- Claustrophobia
- Facial Hair
- Full Field of View for Reading or Watching TV Before Bed
- Tossing and Turning During Sleep
Size chart
Includes two cushion and seal sizes in the box:
- Small
- Large
Compatibility
Compatible with standard CPAP and Bi-Level therapy machines operating within a pressure range of 3 to 25 cmH²O.
How to use
Fitting Your Mask:
Remove the plastic cover from the Silicone Seal.
- Holding the mask in one hand, spread the Headgear with the free hand just enough to fit comfortably over the head.
- Lightly hold the mask against the face covering the nose then slowly pull the Headgear over the head.
- Attach the Headgear to the Glider Strap.
- Pull the lower straps as low as possible down the back of the neck. Gently tighten straps to remove slack. Connect to CPAP/Bi-Level machine at prescribed pressure.
- If necessary, tighten the lower straps to eliminate any leaks (Avoid overtightening the straps).
- Use the Silicone Seal that provides the best fit. Small and Large are both provided with the mask.
- When removing the mask, unhook the Headgear from the Glider Strap.
Fitting Tips:
- Forehead pads should rest gently on the forehead without top straps being pulled too tight.
- If there are any leaks after gently tightening the top and lower straps, pull the mask slightly out from the face while straps are still attached. This will allow the Silicone Seal to inflate with air. Put the mask back onto the face.
Assembling / Disassembling Your Mask:
Refer to the assembly/disassembly diagrams in these instructions.
- Place the Foam Cushion into the Mask Base.
- Starting at the apex of the mask, fit the Silicone Seal over the Foam Cushion and onto the Mask Base, finishing at the bottom of the mask.
- Push the Elbow into the Mask Base.
- Lay the Headgear flat with the loop side down. Position the assembled mask over the Headgear and attach the four straps into the corresponding slots in the Forehead Rest and the Glider Strap. This can be done without undoing the Velcro tabs, by sliding the Headgear into the slots.
Warranty
90-day limited manufacturer's warranty
What's included
Headgear is not included by default. If selected, the following components are included:
